Department of Mechanical Engineering (NBA Accredited)
Dr. Manisha Lande
The department aims at preparing our students for various industrial sectors as versatile engineers, hence offers rigorous courses in diverse specializations in mechanical engineering. Our state-of-the-art laboratories, and dedicated faculties are successful mentors, researchers, and teachers backed by visionary higher authorities and management. The department's mission is threefold, aimed at not only students, faculty, and industry, but also the community on a local and national level. Preparing students for careers in industry, academia, or government by fostering in them the technical capabilities and interpersonal skills necessary to succeeding in their fields, as well as the foundation for lifelong learning. The research opportunities available with us are not limited to faculty and masters students; our undergraduate students work alongside many faculty members. Our student-led emerging technology centers and design groups, under the guidance of faculty members, are always seeking opportunities from industry to collaborate on research and projects.
Contact No: 02112-239535
Email Id: hod.mech@vpkbiet.org
- To impart the students with fundamental knowledge of mechanical engineering.
- To provide practical exposure by promoting students for training and internship in related industries.
- Holistic development of the students by inculcating ethical and moral values towards the society and environment.
- To develop association with premier educational institutions, industries and alumni for enhancement of faculty skill.
- Excellence in academics.
- Motivating students for higher studies.
- Establishing Industry-Institute interaction.
- Supporting the faculty qualification improvement.
- Research activities to bring out practical solutions to real world problem.
- Encouraging students for participating in workshops and conferences.
- To continuously update the faculty and students with latest technology and knowledge by organizing Continuing Education Programs
- Students will be able to develop core competency in mechanical engineering.
- Students will be encouraged to participate in co-curricular activities for holistic development.
- Students will be motivated for higher education and competitive examinations
- Students will be nurtured with ethical and moral values to serve society.
- Engineering knowledge: Apply the knowledge of mathematics, science, engineering fundamentals, and an engineering
specialization to the solution of complex engineering problems. - Problem analysis: Identify, formulate, review research literature, and analyze complex
engineering problems reaching substantiated conclusions using first principles of mathematics, natural sciences, and engineering sciences. - Design/development of solutions: Design solutions for complex engineering problems
and design system components or processes that meet the specified needs
with appropriate consideration for the public health and safety, and the cultural, societal, and environmental considerations. - Conduct investigations of complex problems: Use research-based knowledge and
research methods including design of experiments, analysis and interpretation
of data, and synthesis of the information to provide valid conclusions. - Modern tool usage: Create, select, and apply appropriate techniques, resources, and
modern engineering and IT tools including prediction and modeling to
complex engineering activities with an understanding of the limitations. - The engineer and society: Apply reasoning informed by the contextual knowledge to
assess societal, health, safety, legal and cultural issues and the consequent
responsibilities relevant to the professional engineering practice. - Environment and sustainability: Understand the impact of the professional engineering
solutions in societal and environmental contexts, and demonstrate the
knowledge of, and need for sustainable development. - Ethics: Apply ethical principles and commit to professional ethics and responsibilities and norms of the engineering practice.
- Individual and team work: Function effectively as an individual, and as a member or leader in diverse teams, and in multidisciplinary settings.
- Communication: Communicate effectively on complex engineering activities with the
engineering community and with society at large, such as, being able to
comprehend and write effective reports and design documentation, make effective presentations, and give and receive clear instructions. - Project management and finance: Demonstrate knowledge and understanding of the
engineering and management principles and apply these to one’s own work,
as a member and leader in a team, to manage projects and in multidisciplinary environments. - Life-long learning: Recognize the need for, and have the preparation and ability to engage
in independent and life-long learning in the broadest context of
technological change.
- Students of the program will achieve excellence in design, thermal and manufacturing system by acquiring/applying mechanical engineering knowledge.
- Students will develop an approach to solve multidisciplinary problems by using modern tools.
- Students will engage in higher studies, research and other continuous professional development activities.
- Students will be able to analyze, interpret and provide solutions to the real life mechanical engineering problems.
Board of Studies (BoS)
Board of Studies (BoS) Committee |
|---|
| BoS Committee 2024-25 |
| BoS Committee 2023-24 |
Minutes of Meeting (MoM) |
| MoM (28-02-2025) MoM (09-08-2024) |
| MoM (27-02-2024) MoM (07-09-2023) |
Programs Offered
| Title | Full time/Part time | Duration | Intake | Established | |
|---|---|---|---|---|---|
| B.Tech. Mechanical Engineering | Full Time | 4 years/ 8 sem | 60 | 2002 | |
| M.Tech. Mechanical Engineering (Robotics and Automation) |
Full Time | 2 years/ 4 sem | 18 | 2021 | |
| Ph.D. Mechanical Engineering | Full Time | - | - | 2023 |
Vision
Mission
Faculty
Faculty Name |
Designation |
Qualification |
Regular/Contract |
Date of Joining |
| Dr. Parashuram Chitragar
Name: Designation: Qualification: Research Interests: Email Id: Dr. Parashuram Chitragar Professor & Dean (Alumni Affairs) B.E.(Mech. Engg), M.Tech(Thermal & Fluids Engg), Ph.D.(NITK, Surathkal) I.C. Engines (Alternative fuels), Heat Transfer and Refrigeration parashuram.chitragar@vpkbiet.org
Mr. Chitragar Parashuram Ramanna received B.E. Degree in Mechanical Engineering in 1995 from
Basaveshwar Engineering College, Bagalkot affiliated to Karnatak University Dharwad Karnataka.
He obtained M.Tech. in the area of Thermal and fluids Engineering in 2007 from Dr. Babasaheb
Ambedkar Technological university, Lonere, Raigad, Maharashtra. Presently he is pursuing his
doctoral program in the field of Alternative Fuels for SI engines from National Institute of
Technology Karnataka, Surathkal. He has 17 years of teaching experience and 3 years industrial experience.
|
Professor & Dean (Alumni Affairs) | Ph.D.(NITK, Surathkal) | Regular | 02/04/2001 |
| Dr. Sachin Bhosle
Name: Designation: Qualification: Research Interests: Email Id: Mobile No: Dr. Sachin Bhosle Professor & Dean Academics B.E., M.E. (Mech. Engg.), Ph.D. Mechanical Engg. (MTU,USA.) Bio-Materials sachin.bhosle@vpkbiet.org 9881821920
Mr. Sachin Bhosle is a Professor of Mechanical Engineering and recipient of faculty development program at VPKBIET. He has been deputed to Michigan Technological University,
USA. This program offers three
years full time deputation for earning Ph.D. degree to teacher-scholars who
exemplify the outstanding integration
of teaching, research and administration.
|
Professor & Dean Academics | Ph.D. (MTU,USA) | Regular | 02/07/2007 |
| Dr. Manisha Lande
Name: Designation: Qualification: Research Interests: Email Id: Mrs. Manisha Lande Associate Professor & HOD B.E.(Industrial Engg), M.Tech (Production Engg), Ph.D.(Production Engg-RTMNU Nagpur) Quality tools & Lean Six Sigma manisha.lande@vpkbiet.org
She has completed her B.E in Industrial Engineering from Nagpur
University (RTMNU) in 2001. In 2009, She has completed her M.E.
in production engineering from Chattisgadhe University (CSVTU).
She has completed her Ph.d from Nagpur University (RTMNU) in 2017 on "Quality & productivity Improvement Framework for Micro Small and Medium Enterprises (MSME) using Lean and Six Sigma"
under the guidance of Dr.R.L.Shrivastava Professor Y.C.C.E, Nagpur and work was mentored by Prof. Dinesh Seth Professor Qatar University, Doha, Qatar.
|
Associate Professor & HOD | Ph.D.(RTMNU, Nagpur) | Regular | 18/09/2017 |
| Dr. Avinash Kolekar
Name: Designation: Qualification: Research Interests: Email Id: Dr. Avinash Kolekar Assistant Professor B.E.(Mech), M.E.(Heat Power Engg),Ph.D.(IIT,Bombay) I.C. Engines, Alternative Fuels for IC Engines, Refrigeration and Air Conditioning, Heat Transfer. avinash.kolekar@vpkbiet.org
Mr Avinash Kolekar is pursuing PhD at Indian Institute of Technology, Bombay, Mumbai, India.
He has completed his undergraduate studies in Mechanical Engineering in 2001 at Walchand
College of Engineering,
Sangli from Shri Shivaji University, Kolhapur, India. He did his post graduate degree
(M.E.) in the area of 'Heat Power Engineering'
in 2004 at Government College of Engineering, Karad from Shri Shivaji University, Kolhapur, India.
He worked as lecturer from August 2004 to December 2009 and from January 2010,
he is working as Assistant Professor in
Mechanical Engineering Department at Vidya Pratishthan's College of Engineering (VPCOE) Baramati.
He has taught various subjects
in the area of Thermal Engineering such as Thermodynamics, I C Engines, Heat Transfer, Refrigeration
and Air Conditioning,
Computer Oriented Numerical Methods etc.
|
Assistant Professor | Ph.D. (IIT,Bombay) | Regular | 02/08/2004 |
| Dr. Vipin
Gawande
Name: Designation: Qualification: Research Interests: Email Id: Dr. Vipin Gawande Assistant Professor B.E (Mech. Engg.), M.Tech[Heat Power Engg], Ph.D (V.N.I.T, Nagpur) Computational Fluid Dynamics, Heat Transfer and Solar Energy vipin.gawande@vpkbiet.org
Dr. Vipin B. Gawande has completed his B.E in Mechanical Engineering from Government College of Engineering, Amravati in 2004. Later he worked as a CFD Engineer at Mechwell Industry, Nashik. After scoring 90.02 percentile in GATE examination, he joined M. Tech course in Heat Power Engineering at Visvesvaraya National Institute of Technology (V.N.I.T) Nagpur. He is also a recipient of Ph.D Degree from V.N.I.T Nagpur. He has total 06 years of experience, including teaching, research and industry. He has also completed a minor project sponsored by Department of Science and Technology (D.S.T), Government of India.
|
Assistant Professor | Ph.D.(VNIT, Nagpur) | Regular | 01/01/2018 |
| Mr. Shrinivas Shelge
Name: Designation: Qualification: Research Interests: Email Id: Mr. Shrinivas Shelge Assistant Professor B.E.(Mechanical Engg.), M Tech.(CAD-CAM,VNIT, Nagpur) Biomechanics and FEM shrinivas.shelge@vpkbiet.org
Shelge Shrinivas Vishwambharrao has completed his degree in Mechanical
Engineering from Dr. Babasaheb Ambedkar Marathwada University in 2004 and
completed his post graduation in CAD-CAM from VNIT Nagpur in 2009. He has
total 9 years of teaching experience. |
Assistant Professor | M. Tech.(CAD-CAM),Ph.D.(Pursuing) | Regular | 04/01/2010 |
| Mrs. Prachi Kale
Name: Designation: Qualification: Research Interests: Email Id: Mrs. Prachi Kale Assistant Professor B.E.(Mechanical Engg.),M.E.(Design Engg.), Ph.D. Pursuing Tool Design, Stress analysis and optimization. prachi.kale@vpkbiet.org
Prachi D. Kale has completed her Master degree in Mechanical Design from Walchand Institute of Technology ,Solapur in 2012 and B.E. Mechanical sadnwich from All India Shree Shivaji Memorial society’s college of Engg. Pune University in 2005. |
Assistant Professor | M.E.(Design Engg.), Ph.D. Pursuing | Regular | 22/07/2008 |
| Mr. Vishal Bhagwat
Name: Designation: Qualification: Research Interests: Email Id: Mr.Vishal Bhagwat Workshop Superintendent B.E.(Mech. Engg.),M. Tech.(Manufacturing Tech.) Ph.D Pursuing Manufacturing, Robotics, Mechatronics, Material Science and Metallurgy, FEM and programming tools like MATLAB, etc. vishal.bhagwat@vpkbiet.org
Mr. Vishal B. Bhagwat has completed his graduation in Mechanical Engineering from Shri
Vitthal Education & Research Institute's College of Engineering Pandharpur, Pandharpur
(Solapur University) in the academic years 2005-2009. Next he enrolled for post graduation
and completed M.Tech in Manufacturing Technology from National Institute of Technology Calicut,
Kerala for the academic years 2009-2011.
|
Workshop Superintendent | M. Tech.(Manufacturing Tech.), Ph.D Pursuing | Regular | 26/06/2011 |
| Mr. Dadasaheb Rupanwar
Name: Designation: Qualification: Research Interests: Email Id: Mr. Dadasaheb Rupanwar Assistant Professor B.E.(Production Engg.), M.Tech.(Design Engg.,IIT-Bombay) Mechatronics, Robotics, FEM and programming tools like MATLAB, control system, MEMS. dadasaheb.rupnawar@vpkbiet.org
Prof. Dadasaheb Rupanvar has completed his B.E. in Production Engineering from Pune
University in 2001. He has more than five years of teaching research and industries
experience.Dadasaheb has worked as a 'Trainee Engineer'
in Excellent Engineering Industries Pvt. Ltd. Sangli from March 2002 to November 2002.
|
Assistant Professor | M.Tech.(Design Engg.,IIT-Bombay) | Regular | 18/08/2011 |
| Mr. Hanumant Borate
Name: Designation: Qualification: Research Interests: Email Id: Mr. Hanumant Borate Assistant Professor B.E.(Production Engg.),M.E.(Design Engg.), Ph.D Pursuing Manufacturing, Design Engineering hanumant.borate@vpkbiet.org
Borate H P received his degree in Production Engineering from pune University in 2003.
He has total 6 years Industrial Experience in Walchandnagar industries limited, Walchandnagar,
as Production Planning Engineer for first two years and then as Production Engineer.
During this period he
has worked on micro scheduling and annual operating plan for Nuclear Division.
He was also involved in manufacturing of
ASME Coded jobs like: Heat Exchanger, Refinery Reactors, Columns, Pressure Vessels,
Support Tank. He has worked in team
which was responsible for Process plan for manufacturing of Heat Exchanger and Columns.
He has involved in Welder Performance Qualifications for Support
Tank job. Borate H P has designed and manufactured several fixtures for nuclear components.
He has completed Quality Management Diploma organized by
Walchandnagar Industries limited for their employees. He is presently working
as Workshop Supritendant.
|
Assistant Professor | M.E.(Design Engg.),Ph.D Pursuing | Regular | 01/02/2010 |
| Mr. Keshav Jadhav
Name: Designation: Qualification: Research Interests: Email Id: Mr. Keshav Jadhav Assistant Professor B.E.(Mech. Engg.),M.Tech.(Thermal & Fluids Engg) Heat Transfer, I.C. Engines, Refrigeration and Air-Conditioning keshav.jadhav@vpkbiet.org
Keshav M. Jadhav received his BE (Mechanical) from University of Pune in 2008 from S.V.P.M'S College of Engineering,
Malegaon(BK), Baramati. He worked as a lecturer at Vidya Pratishthan's College of Engineering, Baramati during 2008-2009.
After that Keshav received his M.Tech. in Thermal and Fluids Engineering from Dr.Babasaheb Ambedkar Technological University
Lonere, Raigad in 2011.
|
Assistant Professor | M.Tech.(Thermal & Fluids Engg) | Regular | 01/08/2011 |
| Ms. Mona Yadav
Name: Designation: Qualification: Research Interests: Email Id: Ms. Mona Yadav Assistant Professor B.E.(Power Engg), M.Tech.(Heat Power Engg),Ph.D. Pursuing Thermodynamics, Heat Transfer, I.C. Engines, Computational Fluid Dynamics. mona.yadav@vpkbiet.org
Mona S. Yadav received her BE (Power) from Nagpur University in 2013 from National Power Training Institute, Nagpur. She received herM.Tech. in Heat Power Engineering from ShriRamdeobaba College of Engineering and Management, Nagpur. in 2016 and worked as a lecturer at GovernmentCollege of Engineering, Nagpur during July 2016 to November 2016.
|
Assistant Professor | M.Tech.(Heat Power Engg),Ph.D. Pursuing | Regular | 15/12/2016 |
| Mr. Pravin Dhandore
Name: Designation: Qualification: Research Interests: Email Id: Mr. Pravin Dhandore Assistant Professor B.E.(Mech. Engg.),M.E.(Design Engg.) Vibration & Manufacturing pravin.dhandore@vpkbiet.org
Mr. Pravin V Dhandore completed his graduation in Mechanical Engineering from Sir Vishvesryya Institute of Technology
Nashikin 2011. He completed his M.E in Design in 2016 from Shri Vitthal Education and Research Institute College
of Engineering,Pandharpur.
|
Assistant Professor | M.E.(Design Engg.) | Regular | 15/12/2016 |
| Mr. Suraj Kumbhar
Name: Designation: Qualification: Research Interests: Email Id: Mr. Suraj Kumbhar Assistant Professor, Training & Placement Officer B.E.(Mech. Engg.),M.E.(Machine Design), Ph.D. Pursuing Mechanical Vibration, PLM, PDD, PDI, PDM suraj.kumbhar@vpkbiet.org,tpo@vpkbiet.org, placement@vpkbiet.org
Prof. Suraj H. Kumbhar completed his B.E. in Mechanical Engineering under Savitribai Phule Pune University, Pune. He began his academic career as a Lecturer at Finolex Academy of Management and Technology (Mumbai University), Ratnagiri, where he served from 2013 to 2016. In 2016, he earned his M.E. in Machine Design from the same institute.
|
Assistant Professor, TPO | B.E.(Mech. Engg.),M.E.(Machine Design), Ph.D. Pursuing | Regular | 02/01/2017 |
| Dr. Vinod Todkari
Name: Designation: Qualification: Research Interests: Email Id: Dr. Vinod Todkari Assistant Professor B.E.(Mechanical Engg.),M.Tech (Thermal & fluids Engg.),Ph.D. Impinging Jets, CFD, Fluid Mechanics, Heat Transfer vinod.todkari@vpkbiet.org
Dr. Vinod C. Todkari received B.E. Degree in Mechanical Engineering in 2001 from AISSMS College of Engineering, Pune, affiliated to SPPU (formerly known as Pune Univesity). He obtained M.Tech. in the area of Thermal and fluids Engineering in 2008 from Dr. Babasaheb Ambedkar Technological University, Lonere, Raigad, Maharashtra. Being highest CGPI holder in M.Tech (CGPI 9.44), he was awarded with Gold Medal. He obtained his doctorate degree in the field of Fluid Mechanics from Dr. Babasaheb Ambedkar Technological University, Lonere, Raigad, Maharashtra in 2021. He has 19 years of teaching experience.
|
Assistant Professor | Ph.D. | Contract | 31/08/2020 |
| Mr. Shrikant Mahadik
Name: Designation: Qualification: Research Interests: Email Id: Mr. Shrikant Mahadik Assistant Professor B.E.(Mech. Engg.),M.E.(Design Engineering),Ph.D. Pursuing Solid Mechanics - Stress Analysis. shrikant.mahadik@vpkbiet.org
Mr. Shrikant received his B.E. Degree in Mechanical Engineering in 2011 from Vidya Pratishthan’s College of Engineering, Baramati affiliated to Pune University (presently SPPU) Maharashtra. He received his M.E. degree in the area of Mechanical Design Engineering in 2014 from Vidya Pratishthan’s College of Engineering, Baramati affiliated to Pune University (presently SPPU) Maharashtra. Presently he is pursuing his doctoral program in the field of Solid Mechanics from SPPU, Pune. He has 10 years of teaching experience and 1 year industrial experience.
|
Assistant Professor | M.E.(Design Engg.),Ph.D. Pursuing | Contract | 31/08/2020 |
| Mr. Deepak Bhosale
Name: Designation: Qualification: Research Interests: Email Id: Mr. Deepak Bhosale Assistant Professor B.E. (Mech. Engg.), M.Tech(Design Engg.) Ph.D.(Pursuing) Waste heat Recovery, RAC, Thermodynamics, Heat Transfer deepak.bhosale@vpkbiet.org
Mr. Deepak S. Bhosale received B.E. Degree in Mechanical Engineering in 2012 from SVPM’s College of Engineering, Malegoan (BK),affiliated to SPPU (formerly known as Pune Univesity). He obtained his M.E. in the area of Design Engineering in 2019 from VPKBIET (formerly known as VPCOE) Baramati.Presently he is pursuing his doctoral program in the field of Thermal Engineering from VIT Vellore . He has 2 years of teaching experience.
|
Assistant Professor | M.Tech(Design Engg.) Ph.D.(Pursuing) | Contract | 31/08/2020 |
Lab Technician Staff | ||||
| Mr. Uddhav Kate
Name: Designation: Qualification: Email Id: Mr. Uddhav Kate Lab Technician ITI (Fitter) udhav.kate@vpkbiet.org |
Lab Technician | ITI (Fitter) | ||
| Mr. Milind Utpat
Name: Designation: Qualification: Email Id: Mr. Milind Utpat Lab Technician Diploma in Mechanical Engineering milind.utpat@vpkbiet.org |
Lab Technician | Diploma in Mechanical Engineering | ||
| Mr. Rahul Nimbalkar
Name: Designation: Qualification: Email Id: Mr. Rahul Nimbalkar Lab Technician Diploma in Mechanical Engineering rahul.nimbalkar@vpkbiet.org |
Lab Technician | Diploma in Mechanical Engineering | ||
| Mr. Dipak Taware
Name: Designation: Qualification: Email Id: Mr. Dipak Taware Lab Technician Diploma in Mechanical Engineering dipak.taware@vpkbiet.org |
Lab Technician | Diploma in Mechanical Engineering | ||
Workshop Staff | ||||
| Mr. Dhananjay Sutar
Name: Designation: Qualification: Email Id: Mr. Dhananjay Sutar Instructor (Carpentry) ITI dhananjay.sutar@vpkbiet.org |
Instructor (Carpentry) | ITI | ||
| Mr. Sadashiv Shendge
Name: Designation: Qualification: Email Id: Mr. Sadashiv Shendge Instructor (Smithy) ITI, NCTVT sadashiv.shendge@vpkbiet.org |
Instructor (Smithy) | ITI, NCTVT | ||
| Mr. Vinitkumar Thombare
Name: Designation: Qualification: Email Id: Mr. Vinitkumar Thombare Welder ITI, NCTVT vinitkumar.thombare@vpkbiet.org |
Welder | ITI, NCTVT | ||
| Mr. Sudam Kadhane
Name: Designation: Qualification: Email Id: Mr. Sudam Kadhane Turner ITI, NCTVT sudam.kadhane@vpkbiet.org |
Turner | ITI, NCTVT | ||
Dept Laboratories
Engineering Metallurgy Lab
Equipments
Rockwell & Brinell Hardness Tester ,Metallurgical Microscope for Microscopic Examination , Muffle Furnace for Heat Treatment of Materials,Micro-Vickers Hardness Tester, & Double Disc Polishing Machine for Specimen Preparation
Lab. Incharge: Mr. V. B. Bhagwat
Vibration and Mechanics Lab
Equipments
Mini straight line air clamp line voltage adapter strain indicator,Power oscillator and Vibration Exciter
Lab. Incharge: Mr. Rupanwar D. D.
Metrology and Quality Control Lab
Equipments
Monochromatic Light Unit for Flatness Checking ,Projector for Thread measurement,
Lab. Incharge:Mr. Kumbhar S. K.
CAD Lab 1
Equipments
Computers i5: 20 Qty, Softwares-ANSYSY, Solid Edge Master CAM, Auto Cad, LCD,Msc. Nastran
Lab. Incharge: Mr. S. V. Shelge
Basic Mechanical Lab
Equipments
Two Stroke four stroke engine models, Gear Models, Boiler Models, Charts
Lab. Incharge: Mr. Dhandore P. V.
CAD Lab 2
Equipments
Computers i5: 20 Qty, Softwares-ANSYSY, Solid Edge Master CAM, Auto Cad, LCD, Msc. Nastran
Lab. Incharge: Mr. S. V. Shelge
Dynamics of Machinery and Theory of Machines Lab
Equipments
Universal Vibration Machine, Motorised Gyroscope, Static and Dynamics Balancing Apparatus, Whirling speed of shaft equipment.
Lab. Incharge: Mrs. P. D. Kale
Heat Transfer & Refrigeration and Air Conditioning Lab
Equipments
Vapour Absorption Test Rig Ice Palnt test Rig Air Conditioning Test Rig Thermal Conductivity LCD.
Lab. Incharge: Mr. P. R. Chitragar
Hydraulics and Turbo Machines Lab
Equipments
Redwood Viscometer Hydrostatic Bench, Electrical Analogy Apparatus Modified Bernoullis apparatus
Lab. Incharge: Ms. Yadav M. S.
I C Engine and Energy Research Lab
Equipments
VCR Engine Test Rig Computerized Diesel and Petrol Engine Test Rig Exhaust Gas Analyzer.
Lab. Incharge: Mr. A. H. Kolekar
Material Testing Lab
Equipments
Universal testing machine with extensometer (1000kn) universal testing machine (400kn) Izod impact
Lab. Incharge: Mr. Borate H. P.
Mechatronics Lab
Equipments
Pneumatic Trainer Heat Exchanger Hydraulic Trainer Level & Flow Control trainer LVDT
Lab. Incharge: Mr. D. D. Rupanwar
Steam Power Plant Lab
Equipments
Power Plant with Boiler, Steam turbine, Generator, Condenser, feed Pump, Throttling unit, Separator
Lab. Incharge: Mr. K. M. Jadhav
Thermodynamics Lab
Equipments
Bomb Calorimeter Gas Calorimeter Abels Flash Point Apparatus Pensky Martens Flash Point Apparatus
Lab. Incharge: Mr. K. M. Jadhav
Workshop
Equipments
Carpentry, Machine shop, Welding Shop, Plastic Moulding, Tin Smithy Fitting, Plumbing
Lab. Incharge: Mr. V. B. Bhagwat
Placements
Placements 2024-25
| Name of Students | Name of Company |
| Pranav Shedage | Adani Cement |
| Saurabh Jadhav | Adani Cement |
| Om Shinde | Adani Cement |
| Atharva Sangar | Adani Cement |
| Karan Humbare | Infosys |
| Piyush Kate | Interarch Building Products |
| Sanket Nanaware | Interarch Building Products |
| Pooja Bhoite | Interarch Building Products |
| Pratiksha Thombare | Bosch Chasis |
| Pauranima Nimgire | Bosch Chasis |
| Vaibhav Dhone | Bharat Forge |
| Sagar Ghadage | Bharat Forge |
| Pratik Shinde | Bharat Forge |
| Saurabh Shinde | Bharat Forge |
| Abhay Pansare | Bharat Forge |
| Rushikesh Musale | Bharat Forge |
| Pushkaraj Jadhav | Bharat Forge |
| Mahesh Gore | Walchandnagar Industries |
| Gayatri Gavane | Eleation |
Placements 2023-24
| Name of Students | Name of Company |
| Lokesh Kolekar | Tenneco |
| Omkar Bhosale | TCS |
| Avdhoot More | Technofour |
| Ganesh Gadhave | Technofour |
| Dhiraj Malusare | KSB |
| Akash Nimgire | KSB |
| Ghanshyam Rajure | Analyser |
| Utkarsh Idage | Analyser |
| Nanasaheb Salunkhe | Indovance |
| Ankur Abhang | Indovance |
| Akash Polkar | Adani Cement |
| Shripad Kulkarni | Adani Cement |
| Suraj Thorat | Crab and Taur |
| Prashant Nevase | Crab and Taur |
| Rutuja Magar | Crab and Taur |
| Om Kanse | Capgemini |
| Aditya Pawar | Capgemini |
| Rushikesh Phalke | Capgemini |
| Shivaraj Dande | Capgemini |
| Swapnil Waghmare | S M Auto Engineering Pvt. Ltd. |
| Saurabh Kadam | Hodek Vibration Technology Pvt Ltd |
| Tejas Dhavale | Hodek Vibration Technology Pvt Ltd |
| Tushar Sonavane | Hodek Vibration Technology Pvt Ltd |
| Pratiksha Kondake | Ordnance Factory |
| Tejas Pawar | Knest |
| Sankalp Jiman | Knest |
| Vishwajit Kate | KSB |
| Nihal Mulani | Wilo |
| Amar Godase | Bharat Electronics Limited |
| Pooja Nalawade | Eleation |
Placements 2022-23
| Name of Students | Name of Company |
| Navnath Pawar | Aviotron Aerospace Pvt. Ltd. |
| Kiran Memane | Divgi |
| Mayur Madane | Fiat India |
| Vishal Shinde | JB. Everest |
| Sagar Gavali | JB. Everest |
| Prathviraj Palnate | Saligao (Panji) |
| Omkar Bawalekar | TE Connectivity |
| Mayur Madane | Thermax Package |
| Aryan Jadhav | Cognizant |
| Ashish Jadhav | Cognizant |
| Atik Shaikh | Cognizant |
| Avadhut Jagtap | Cognizant |
| Navnath Pawar | Cognizant |
| Cognizant | |
| Shreya Ingale | Cognizant |
| Shripad Kulkarni | Cognizant |
| Suyash Jagtap | |
| Suraj Jadhav | Crsendo Worldwide |
Student Participation
A group of B.E student, Rohit Chaudhari, Vijay Bankar, Pratik Jagdale, Rushikesh Shirke under the guidance of Mr. Pravin V. Dhandore has presented their paper titiled “Geometric Verification of Gear and Sorting of Defective Gear Using MATLAB” in National level project Competition “Innovator-2020” on 08th June 2020.
A student team including Priyanka B. Kulkarni, Dnyanesh V. Honrao, Rohit M. Kharat and Omkar A. Jadhav has presented their paper titled “Development and parametric comparison of Bedini's free energy generator” in National Level Project Competition, “Innovator-2020” on 08th June 2020 and secured third prize.
Students from B.E, Aditya Akkalkote, Suraj S. Phadtare, Shrihari Awate, Somnath Khandu Hire has participated in state level online competition on 29th and 30th May 2020 and presented their B.E project infront of expert panel. The project was guided by Mrs. Prachi D. Kale.
Students from B.E, Akshay Anil Nalawade, Avdhoot Santosh Bhosale, Yogesh Chillarge and Gajendra Raju Sabane has participated in state level online competition on 29th and 30th May 2020 and presented their B.E project infront of expert panel. The project was guided by Dr. Vipin B. Gawande.
A National Level Paper, Poster, Project and Technical Gaming Competition was organized by MIT College of Railway Engineering and Research, Barshi-413401 on 27th & 28th February 2020. B.E students, Akshay Patil, Mayur Barhate, Mohit Pingale has presented their paper titled “Analysis and Modeling of Trainable Motion Follower Robotic Arm” in this competition. The project was guided by Mr. Vishal B. Bhagwat.
A project idea “ Pesticides flow repellent helmet for farmers” of B.E students, Akshay Nalawade, Yogesh Chillarge, Avadhoot Bhosale and Gajendra Raju Sabne was selected for I2I project competition held by C.O.E.P Pune. The acceptance mail was recived on November 15, 2019.
Students from Department of Mechanical Engineering has submitted their project ideas for the “Avishkar -2019-20” on 15th November 2019, a National Level Project Competition organized by Savitribai Phule Pune University. The project submitted are as follows:
1. Real time surveillance by drone – Team Leader- Mr. Shubham Kadam
2. Stress Corrsoion Cracking Behavior- Team leader- Mr. Rutvij Bhide
3. Water purification using solar energy- Team leader- Mr. Aditya Akkalkote
4. Pesticide inhalation averting helmet- Team leader- Mr. Yogesh Chillarge
5. A novel Technique for bagasse- Team leader- Mr. Dhiraj Annadate
6. Geometric Variation of Gear- Team leader- Mr. Rohit Chaudhari
A certificate of appreciation was received by Mr. Rohan Taware, B.E Student for presenting idea under the theme “Mobility & Energy for the future”. The project was guided by Mr. Avinash H. Kolekar. The idea was submitted on during 31st May 2019 to 31st October 2019.
B.E students from Mechanical Engineering Department, namely Sachin Bichitkar, Prasad Buddiyal, Siddhant Chavan and Ajinkya Kulkarni presented their research paper entitled “CFD analysis of wind turbine with different flange angles” in international Conference on Applied Mechanical Engineering Research (ICAMER2019). It was organised by National Institute of Technology (N.I.T) Warangal during 2nd to 4th May 2019. Dr. Vipin Gawande guided the students during their projects. The presented paper is published in Scopus indexed book series “Lecture Notes in Mechanical Engineering”.
Third Year students from Department of Mechanical Engineering participated in “RIT Hackathon 2019” Project Competition. It was organised by RIT, Islampur dur-ing 29 and 30 March, 2019. These students were: Anoop Rode, Mohit Pingale and Mayur Barhate. The students presented their project model entitled “Godown Dehu-midifying System”. They were guided by Mr. S H Kumbhar.
BE students from Department of Mechanical Engineering presented their paper in the National Conference on Recent Trends and Innovations in Engineering, Science and Technology. It was organised by Sinhagad Institute of Technology and Science at Narhe in Pune. The students were: Amar Deolalikar, Mahendrakumar Gandhale and Dipak Chikane. Their paper was entitled “Zero defect strategies at system level for multistage manufacturing in paint shop”. It was a SPPU sponsored Conference and was organised on 14 and 15 February 2019. They were guided by Dr. S C Bali.
BE students from Department of Mechanical Engineering participated in “DIPEX-2019” Project Competition-cum-Exhibition during 2 to 5 March 2019 It was organ-ised by SGGSIET in Nanded. These students were: Dhananjay Kshirsagar, Mayur Babar and Anmol Pawar. They presented their project entitled “Vibration Control by using Particle Damper”. They were guided by Mr. S H Kumbhar.
BE students from Department of Mechanical Engineering presented their paper in the National Conference on Recent Trends and Innovations in Engineering, Science and Technology. It was organised by Sinhagad Institute of Technology and Science at Narhe in Pune. The students were: Aniket Owal, Mayank Singh, Saurabh Nadgire and Avdhoot Changune. Their paper was entitled “Value Stream Mapping in Weld Shop”. It was a SPPU sponsored Conference and was organised on14 and 15 February 2019. They were guided by Dr. M S Lande.
A Paper Titled “Characteristics of Moistened Bagasse Being Used as a fuel in Boiler Furnace” was presented by Mr. Dhiraj J. Annadate, B.E Student in international conference on nnovtion in thermo-fluid engineering and sciences, N.I.T Rourkela on 10th -12th February 2019. The project was guided by Mr. Machindra S. Gaikwad, Ms. Mona Yadav and Mr. Keshav M. Jadhav.
Mr. Manoj Bagal, Alumni, Department of Mechanical Engineering for getting selected as Police Sub Inspector through MPSC 2017 examination.
Vishal Thorat (2013 Batch-Mechanical) for being topper (1 st rank) in Maharashtra for MPSC examination of Motor Vehicle Inspector (RTO)
Faculty Participation
Dr. Manisha Lande completed a Faculty Development Program (AICTE-ATAL) on ‘Advancement in manufacturing Technology for Industrial Application’ during 24 to 28 August 2020. The program was organised by Gyan-Ganga Institute of Technology and Science.
Dr. Shirish Bali has completed an AICTE Training And Learning (ATAL) Academy FDP on "Blended Learning and Flipped Classroom" from 10 to 14 August 2020. The program was organised by Sardar Vallabhbhai National Institute of Technology (SVNIT), Surat.
Department of Mechanical Engineering has organized a state level online project competition “Innovator -2020” on 8th June 2020. The main purpose of organizing this event is to foster the research culture among young innovative minds and to provide them a platform to present their findings from their project work. Students' projects were invited in Major and Minor project categories. During the event a technical talk was organized on “Importance of Project Based Learning in Research” which was delivered by Dr. Sunil Chamoli, Assistant Professor, G.B. Pant College Ghurdauri, Pauri Garwal Uttarakhand (India).
Intellectual Property Rights (I.P.Rs) are a set of exclusive rights protected by the law which are accorded to creators or persons over their creations for a certain time of period. It has been observed that there is an inadequate knowledge about the rights of individuals to protect their ideas and innovations and low awareness about the procedures involved in obtaining an I.P.R among the students. So to create awareness about the Intellectual Property Rights (I.P.R) among the students, Department of Mechanical Engineering has conducted two day short term training on “Importance of I.P.R in Research and Entrepreneurship” on 27th-28th February 2020. The program was attended by nearly 60 to 65 S.E students from Mechanical and Civil Engineering Department, along with faculty members.
Department of Mechanical Engineering has organized a three day workshop on “Robotics with Raspberry Pi3 using python Certification Program” during 17th to 19th January 2020. A batch of 20 students was selected and workshop was conducted in the CAD lab of the department. Trainer Mr. Yogesh has explained the basic functionality of the Raspberry Pi B+ board. He also describes how to set up the board, configure it, and use it. He also describes the basics of the Python programming language to prepare students for programming on the Raspberry Pi. Students also learned to handle simple projects on the raspberry pi using python language.
Department of Mechanical Engineering arranged Two Days Workshop on AutoCAD dated 10 & 11 January 2020. In this workshop students learn the basics of AutoCAD. This course was designed so that the commands and instructions should work on almost any version of AutoCAD, although this version was designed specifically for AutoCAD 2018.
Workshop on “Reference Management for Project Report Writing by Using Mendeley” . Mendeley is a free online and desktop reference manager that can help to save PDF articles, organize citations, create bibliographies, insert references into papers/reports, and collaborate with other Mendeley users. This workshop was conducted under ISTE and SAE Club. It was conducted on 30th September 2019. Around 15 students and few faculties had attended the workshop.
Mr. Avinash Kolekar
Department of Mechanical Engineering organized the workshop on “Vehicular Pollution: Causes, Impact and remedies” on 7 March 2019. The workshop was organised in collabora-tion with BCUD of Savitribai Phule Pune University. Mr. Vikrant Bhalerao, Regional Officer, Maharashtra Pollution Control Board, Mumbai delivered lecture on Pollution formation in IC Engines. He also discussed the technology changes for achieving Bharat stage-VI and future trends regarding pollution control techniques. During afternoon session, Prof. I H Patel, Me-chanical Engineering, SVPM’s College of Engineering, Malegaon discussed the major Impacts of Vehicular Pollution and also the technologies adopted to reduce different pollutants from vehicles during his lecture. Prof. P R Chitragar, Head of Mechanical Engineering Department and Mr. A H Kolekar discussed the relevance of the topic with their academics. About 80 students and faculty members participated in this workshop. Hon. Principal, Dr. R S Bichkar
Dr. Vipin Gawande and Mr. Akshay Bhapkar
Department of Mechanical Engineering organized a One-Day “Skill Development Program on Solid Works Sheet Metal 2019” on 23 February 2019 under Mechanical Engineering Students Association MESA Collegiate Club and about 21 students from the Department participated. Dr. Vipin Gawande and Mr. Akshay Bhapkar co-ordinated the program. The event was guided by Dr. P R Chitragar, Head of Depart-ment. All faculty members and technical staff graced the event with their support and active participation.
Mr. Shrinivas Shelge & Mr. Hanumant Borate
Mr. Shrinivas Shelge & Mr. Hanumant Borate have secured second position at Baramati Taluka Badminton Association (BTBA) Tournament.
Mr. Sachin Bhosle
Best Scholar Award to Dr. Sachin Bhosale by Michigan Technological University, Houghton USA.
Faculty Publications
Faculty Publications: 2024
Mahadik, S.C., Deulgaonkar, V.R., Bhosle, S.M. (2024)., ‘Robotic Joint Torque Sensors: A Review’ Techno-societal 2022. ICATSA 2022. Springer, Cham. Switzerland AG 2024. https://doi.org/10.1007/978-3-031-34644-6_70.
Pondkule, S.M., Bhosle , S.M., Deulgaonkar, V.R., Mahadik, S.C., Bhoite, K.L., Attar, K.C. (2024), ‘Revolutionizing in Tools: A New Era of Cutting Tool Health Monitoring with IoT. Springer Conference paper: Advances in Manufacturing Engineering. ICFAMMT 2024. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-97-4324-7_28. Print ISBN978-981-97-4323-0, Online ISBN978-981-97-4324-7
Sunil Pondkule, Sachin Bhosle , ‘Next-Generation Tool Condition Monitoring: Leveraging AI and IoT in Milling Applications’, Bulletin for Technology and History Journal. (ISSN NO: 0391-6715). UGC-CARE Approved Group ‘II’ and Scopus indexed journal. Volume 24, Issue 2, 2024.
Sunil Pondkule, Sachin Bhosle , and Pravin Dhandore, ‘Experimental Investigation of Ball Bearing for Vibration Analysis’ , Techno-societal 2022, ICATSA 2022, Springer Nature Switzerland AG 2024. https://doi.org/10.1007/978-3-031-34644-6_74.
Lande, M.S. and Lande, S. (2024) , "Application of hybrid analytic hierarchy process and graph theoretic approach for analysis of barriers of high setup time", The TQM Journal, Vol. ahead-of-print No. ahead-of-print. https://doi.org/10.1108/TQM-01-2024-0019
Bhagwat, V. B. , Kamble, D. A., & Kore, S. S. (2024). Effect of Heat Treatments and Addition of %Si on Microstructure and Mechanical Properties of Steel Sand Casting. International Review of Mechanical Engineering (IREME), vol-18, No.3, 129-136. DOI: https://doi.org/10.15866/ireme.v18i3.24201
Bhagwat, V. B. , Kamble, D. A., & Kore, S. S. (2024). An Overview of Machine Learning Applications in Metal Casting Industries. Archives of Metallurgy and Materials, 1577-1584. DOI: https://doi.org/10.24425/amm.2024.151428
Faculty Publications: 2023
Kiran Bhoite, Dr. S. M. Bhosle, et.al., ‘Machine Learning Based Fluid-Transportation Monitoring and Controlling’ International Journal on Recent and Innovation Trends in Computing and Communication. ISSN: 2321-8169 Volume: 11 Issue: 9. (Indexing : Scopus) DOI: https://doi.org/10.17762/ijritcc.v11i9s.7455 (September 2023).
Dr.M.S.Lande et.al,”Industrial & social application of solar dryer for drying the agricultural product” Industrial Engineering Journal Aug.2023 ISSN:0970-2555 http://www.journal-iiie-india.com/1_aug_23/14.2_8.pdf
Dr.M.S.Lande et.al,”Industrial application multitask fire fighting robot” Industrial Engineering Journal June 2023 ISSN:0970-2555 http://www.journal-iiie-india.com/1_june_23/6.3_6.pdf
Bankar, O., Mule, N., Prabhune, S., & Gawande, V. B. (2023). A Comparison of Mechanical Properties of 3D Printed Specimens Based on Filament Quality. In Recent Trends in Mechanical Engineering: Select Proceedings of PRIME 2021 (pp. 299-304). Singapore: Springer Nature Singapore.
Bankar, C., & Gawande, V. B. (2023). Computational Fluid Dynamics (CFD) Analysis of Pesticide Flow-Repellent Helmet for Farmers. In Recent Trends in Mechanical Engineering: Select Proceedings of PRIME 2021 (pp. 745-752). Singapore: Springer Nature Singapore.
Mahadik, S.C., Deulgaonkar, V.R., Bhosle, S.M. (2024). Robotic Joint Torque Sensors: A Review. In: Pawar, P.M., et al. Techno-societal 2022. ICATSA 2022. Springer, Cham. https://doi.org/10.1007/978-3-031-34644-6_70
Faculty Publications: 2022
Sachin M. Bhosle , Craig R. Friedrich, ‘ENGINEERING NANOTEXTURED TITANIUM SURFACES’, Eur.Chem.Bull.2022,Vol.,11, Issue 12, 250-264 (ISSN 2063-5346) (Indexing : Scopus).
Gawande, V., Dhoble, A., Zodpe, D., Chamoli, S., & Bali, S. (2022). Optimisation of design parameters in solar air heater channels with right-angle triangular inserts using the Taguchi approach. International Journal of Ambient Energy, 44(1), 693–702. https://doi.org/10.1080/01430750.2022.2142284
Hanumant Borate , Abhay Utpat, “Effect of Process Parameters for Photochemical Machining of Muntz Metal” International Conference on advance in Material Science, Mechanical and Civil Engineering, 14-15 Feb. 2022, organised by Annasaheb Dange College of Engineering and Technology, Ashta.
Jadhav, K.M., Gaikwad, M.S., Yadav, M.S. (2022) . Performance Analysis of Spark Ignition Engine for Different Energy Shares of Biomethane. In: Palanisamy, M., Natarajan, S.K., Jayaraj, S., Sivalingam, M. (eds) Innovations in Energy, Power and Thermal Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-16-4489-4_9
Manisha Lande , Ms. Shivani S. Patil , Ms. Pallavi A. Waghmare , Ms. Radhika S. Thombare & Mr. Saiganesh S. Bhosle (2022) “Design and Computational Fluid Dynamics (CFD) Modelling for Solar Food Dryer”, GIS Science journal ISSN No:1869-9391 ,Vol 9 Issue 7,2022 Page no 1511 to 1520. DOI:20.18001.GSJ.2022.V9I6.22.3955806
Faculty Publications: 2021
Shrikant Mahadik, Sachin M. Bhosle, ‘Efficient Hybrid Vehicle: Design & Development’, Book Published, LAP LAMBERT Academic Publishing (07 Sept 2021) 978-620-4-20154-2.
Avinash H. Kolekar, Suneet Singh, Anuradda Ganesh, “Experimental analysis of effective combustion heat release rate for improving the performance of synthetic biogas-diesel dual-fuel engine”, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, DOI:10.1080/15567036.2021.1946214, 2021.
M. S. Gaikwad, K. M. Jadhav, A. H. Kolekar, P. R. Chitragar, Combustion characteristics of biomethane–diesel dual-fueled CI engine with exhaust gas recirculation, Biofuels,12(4),369-379, 2021. DOI: 10.1080/17597269.2018.1479136
Suraj H. Kumbhar, K. R. Jagtap, S. C. Bali, “A Review on Vibrational Characteristics of Aluminium (Al) Matrix Composites”, Journal of Huazhong University of Science and Technology, (ISSN-1671-4512), Vol. 50, Issue 5, 2021. Article link: https://app.box.com/s/7v6x4kn6ok3vb9tli7igifl2mymvdtz2
P.R. Chitragar, K.V. Shivaprasad, M.S. Gaikwad, G.N. Kumar, “Investigation on performance, combustion and emission characteristics of 4-stroke four cylinder hydrogen fuelled SI engine”, AIP Conference Proceedings, Volume 2316, Issue 1, 2021, DOI: 10.1063/5.0036584
Ghadage M.M., Bhagwat V.B., Kadam S.R., Shelage S.V., “Modal Characteristics of Composite Sandwich Structure with Intermediate Layer of Viscoelastic Material”, Techno-Societal 2020, Springer, Cham. https://doi.org/10.1007/978-3-030-69925-3_37.
Manisha Lande ,Prakash Hadule,Suraj Badekar,Mitali Shinde & Mayuri Tongale “Design & CAD Model of Automatic Drainage”,Journal of Huazhong University of Science & Technology,(ISSN-1671-4512) Vol 50,Issue 6,2021.Article link:-https://app.box.com/s/0ezcu5rxnt45bl1trwrft0dsd8nor3ul
Manisha Lande, Sneha Jadhav,Sharayu Jadhav,Akshay Kamble & Priya Gaikwad “Multiple Approach of Smart Intelligent Car Parking System”,Journal of Huazhong University of Science & Technology,(ISSN-1671-4512) Vol 50,Issue 7,2021.Article link:https://app.box.com/s/wnb4req2y66uje4vi7k8ef3qdvs2211n
Bhagwat, V. B., Kamble, D., Chitragar, P. R., & Jadhav, A. (2021), ‘Predicting Interfacial Heat Transfer Coefficient in CO 2-Mould Sand Casting of Steel Using Machine Learning Algorithms’, In Proceedings of the 26thNational and 4th International ISHMT-ASTFE Heat and Mass Transfer Conference December 17-20, 2021, IIT Madras, Chennai-600036, Tamil Nadu, India. Begel House Inc. DOI: 10.1615/IHMTC-2021.470
Deshpande, G.G., Borate, H.P., Wangikar, S.S. (2021). Fabrication and Characterization of Composite Material Connecting Rod. In: Pawar, P.M., Balasubramaniam, R., Ronge, B.P., Salunkhe, S.B., Vibhute, A.S., Melinamath, B. (eds) Techno-Societal 2020. Springer, Cham. pp 87–95 https://doi.org/10.1007/978-3-030-69925-3_9
Faculty Publications: 2020
Sachin Bhosle, Shrikant Mahadik, ‘Autonomous Cars: The Sleeping-Giant’, International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), Scopus Indexed journal, ISSN(P): 2249-6890; ISSN(E): 2249-8001 Vol. 10, Issue 3, Published 22 Sept 2020, 14561-14574. Article link: http://www.tjprc.org/view_paper.php?id=14376
Shrikant Mahadik, Sachin M. Bhosle, ‘Investigation of Stress Concentration in Metallic Plates with special shaped cutout and bluntness’, International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), Scopus Indexed journal, ISSN(P): 2249-6890; ISSN(E): 2249-8001 Vol. 10, Issue 3, Published 16 Sept 2020, 13477-13488 © TJPRC Pvt. Ltd. Paper Id.: IJMPERDJUN20201284. DOI : 10.24247/ijmperdjun20201284.
Machindra S. Gaikwad, Avinash H. Kolekar, Keshav M. Jadhav, Mona S. Yadav & Parashuram R. Chitragar, (2020), “Performance and Emission Analysis of Biomethane-Diesel Dual Fueled CI Engine in the Presence of Exhaust Gas Recirculation,” International Journal of Ambient Energy (Tayor & Francies). DOI: 10.1080/01430750.2020.1722741.
Raj Chavan and Avinash Kolekar, “Solar Rooftop Power Generation System by Using IOT (Arduino and Blynk)”, International Journal of Innovative Science and Research Technology, ISSN No:-2456-2165, Volume 5, Issue 9, 2020.
S. M. Bichitkar, P. P. Buddiyal, S. S. Chavan, A. A. Kulkarni, V. B. Gawande , CFD Analysis of Wind Turbine with Different Flange Angles. In: Voruganti H., Kumar K., Krishna P., Jin X. (eds) Advances in Applied Mechanical Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore, 2020. DOI: 10.1007/978-981-15-1201-8_23
Ghadage M. M., Bhagwat V. B., “Modal Analysis of Carbon Fiber and Carbon Fiber - Rubber Composite Plates”, Journal of Interdisciplinary Cycle Research, ISSN No: 0022-1945, Vol-XII, Issue VII, 110-114, July 2020. DOI:18.0002.JICR.2020.V12I7.008301.3171163
Utkarsha Fulari , Sudhir B. Lande , Lokesh K. Bramhane & Manisha Lande”Battery Life Improvement Technique For Electric Vehicle “,Journal of SEYBOLD report ISSN No 1533-9211,Vol 15,Issue 7 July-2020 Page no 1049 to 1054.
Manisha Lande & Mayur Jadhav,”Cost saving by implementation of Kaizen-Case study”Journal of SEYBOLD report ISSN No 1533-9211 ,Vol 15,Issue 8 July-2020 Page no 422 to 429.
Nilesh C. Dhavane, Parashuram R. Chitragar (2020). “Analysis of Poultry Litter as a Fuel Source in Cogeneration''. International Journal of Innovative Science and Research Technology, Volume 5, Issue 8, August – 2020. ISSN No:-2456-2165. IJISRT20AUG184, Pg.32-35.
V.B. Gawande, A. S. Dhoble, D. B. Zodpe, S.G. Fale, Thermal performance evaluation of solar air heater using combined square and equilateral triangular rib roughness, Australian Journal of Mechanical Engineering, 18(2), 234-244, 2020. DOI: 10.1080/14484846.2018.1519986
Prachi Kale , Pradipkumar Darade, Anil Sahu, “A literature review on injection moulding process on the basis of runner system and process variables”, International Conference on Advances in Materials Processing & Manufacturing Applications (iCADMA 2020), 05-06 Nov. 2020, NIT Uttarakhand.
Prachi Kale , Pradipkumar Darade, Anil Sahu, “A literature review on injection moulding process on the basis of runner system and process variables”, National E-Conference on Research and Developments in Mechanical Engineering (NCRDME-2020) during 26th-27th June,2020 at Department of Mechanical Engineering, GHRCEM, Wagholi Pune.
Faculty Publications: 2019
Faculty Publications: 2018
-
Faculty Publications: 2017
-
Faculty Publications: 2016
-
Faculty Publications: 2015
-
Faculty Publications: 2014
-
Faculty Publications: 2013
-
Placement
-
Mussum ipsum cacilds
11 hours ago via Twitter
Mussum ipsum cacilds, vidis litro abertis. Consetis adipiscings elitis. Pra lá , depois divoltis porris, paradis. Paisis, filhis, espiritis santis. Mé faiz elementum girarzis, nisi eros vermeio, in elementis mé pra quem é amistosis quis leo. Manduma pindureta quium dia nois paga. Sapien in monti palavris qui num significa nadis i pareci latim. Interessantiss quisso pudia ce receita de bolis, mais bolis eu num gostis.
-
Mussum ipsum cacilds
Mussum ipsum cacilds, vidis litro abertis. Consetis adipiscings elitis. Pra lá , depois divoltis porris, paradis. Paisis, filhis, espiritis santis. Mé faiz elementum girarzis, nisi eros vermeio, in elementis mé pra quem é amistosis quis leo. Manduma pindureta quium dia nois paga. Sapien in monti palavris qui num significa nadis i pareci latim. Interessantiss quisso pudia ce receita de bolis, mais bolis eu num gostis.
-
Mussum ipsum cacilds
Mussum ipsum cacilds, vidis litro abertis. Consetis adipiscings elitis. Pra lá , depois divoltis porris, paradis. Paisis, filhis, espiritis santis. Mé faiz elementum girarzis, nisi eros vermeio, in elementis mé pra quem é amistosis quis leo. Manduma pindureta quium dia nois paga. Sapien in monti palavris qui num significa nadis i pareci latim. Interessantiss quisso pudia ce receita de bolis, mais bolis eu num gostis.
-
Mussum ipsum cacilds
Mussum ipsum cacilds, vidis litro abertis. Consetis adipiscings elitis. Pra lá , depois divoltis porris, paradis. Paisis, filhis, espiritis santis. Mé faiz elementum girarzis, nisi eros vermeio, in elementis mé pra quem é amistosis quis leo. Manduma pindureta quium dia nois paga. Sapien in monti palavris qui num significa nadis i pareci latim. Interessantiss quisso pudia ce receita de bolis, mais bolis eu num gostis.
-
Mussum ipsum cacilds
11 hours ago via Twitter
Mussum ipsum cacilds, vidis litro abertis. Consetis adipiscings elitis. Pra lá , depois divoltis porris, paradis. Paisis, filhis, espiritis santis. Mé faiz elementum girarzis, nisi eros vermeio, in elementis mé pra quem é amistosis quis leo. Manduma pindureta quium dia nois paga. Sapien in monti palavris qui num significa nadis i pareci latim. Interessantiss quisso pudia ce receita de bolis, mais bolis eu num gostis.
-
Mussum ipsum cacilds
Mussum ipsum cacilds, vidis litro abertis. Consetis adipiscings elitis. Pra lá , depois divoltis porris, paradis. Paisis, filhis, espiritis santis. Mé faiz elementum girarzis, nisi eros vermeio, in elementis mé pra quem é amistosis quis leo. Manduma pindureta quium dia nois paga. Sapien in monti palavris qui num significa nadis i pareci latim. Interessantiss quisso pudia ce receita de bolis, mais bolis eu num gostis.
-
Mussum ipsum cacilds
Mussum ipsum cacilds, vidis litro abertis. Consetis adipiscings elitis. Pra lá , depois divoltis porris, paradis. Paisis, filhis, espiritis santis. Mé faiz elementum girarzis, nisi eros vermeio, in elementis mé pra quem é amistosis quis leo. Manduma pindureta quium dia nois paga. Sapien in monti palavris qui num significa nadis i pareci latim. Interessantiss quisso pudia ce receita de bolis, mais bolis eu num gostis.
-
Mussum ipsum cacilds
Mussum ipsum cacilds, vidis litro abertis. Consetis adipiscings elitis. Pra lá , depois divoltis porris, paradis. Paisis, filhis, espiritis santis. Mé faiz elementum girarzis, nisi eros vermeio, in elementis mé pra quem é amistosis quis leo. Manduma pindureta quium dia nois paga. Sapien in monti palavris qui num significa nadis i pareci latim. Interessantiss quisso pudia ce receita de bolis, mais bolis eu num gostis.
Video Lectures
| Name of the Faculty | YouTube Link | Courses |
|---|---|---|
| Dr. Parashuram Chitragar | https://www.youtube.com/@parashuramchitragar5018 | Heat Transfer |
| Dr. Sachin Bhosle | https://www.youtube.com/@EduHelp_blog | Manufacturing Processes |
| Dr. Manisha Lande | https://www.youtube.com/@manishalande76 | Metrology & Quality Control, Industrial Engineering |
| Dr. Avinash Kolekar | https://www.youtube.com/@avinashkolekar6743 | Thermodynamics, Applied Thermodynamics |
| Dr. Vipin Gawande | https://www.youtube.com/@dr.vipinbgawande7174 | Engineering Graphics, Systems in Mechanical Engineering (SME) |
| Mr. Shrinivas Shelge | https://www.youtube.com/@shrinivasshelge8973 | Fluid Mechanics |
| Mrs. Prachi Kale | https://www.youtube.com/@prachikale2331 | Theory of Machines |
| Mr. Vishal Bhagwat | https://www.youtube.com/@vbengineers5158 | Systems in Mechanical Engineering, Engineering Graphics |
| Mr. Dadasaheb Rupanwar | https://www.youtube.com/@dadasahebrupanvar | Hydraulics and Pneumatics |
| Mr. Hanumant Borate | https://www.youtube.com/@boratehp | Strength of Material, Mechanical System Design, Design of Machine Element |
| Mr. Keshav Jadhav | https://www.youtube.com/@KeshavJadhav | Numerical Methods, Operations Research, Engineering Graphics, Systems In Mechanical Engineering |
| Ms. Mona Yadav | https://www.youtube.com/@monayadav5499 | Turbo Machines, Refrigeration and Air Conditioning |
| Mr. Pravin Dhandore | https://www.youtube.com/@pravindhandore7405 | Systems in Mechanical Engineering, Engineering Graphics |
| Mr. Suraj Kumbhar | https://www.youtube.com/@surajkumbhar3865 | Mechanical System Design, Design of Machine Element |
| Dr. Vinod Todkari | https://www.youtube.com/@vinodtodkari9073 | Systems in Mechanical Engineering |
| Mr. Shrikant Mahadik | https://www.youtube.com/@stmshritechmedia1200 | ANSYS, GATE |
| Mr. Deepak Bhosale | https://www.youtube.com/@profdeepakbhosale6202 | GATE, Manufacturing Process |
Results
Final Year (BE) CGPA
1. Sagar Ghadage - 10
2. Pratik Shinde - 9.7
3. Pushkaraj Jadhav - 9.55
4. Pooja Bhoite - 9.3
5. Arpita Aadki - 9.2
Third Year (TE) SGPA
1. Nihal Dhaigude - 9.192. Girish Khartode - 9.14
3. Ajinkya Chavan - 8.71
4. Ishan Shevate - 8.43
5. Shaunak Kutwal - 8.19
Second Year(SE) SGPA
1. Mrudula More - 9.52. Leena Rode - 9.14
3. Saniya Nanaware - 9.0
4. Sarthak Baravkar - 8.95
5. Uday Phadatare - 8.82
Final Year (BE) CGPA
1. Nanasaheb Salunkhe - 9.71
2. Pratik Mandhare - 9.05
3. Darshan Rayate- 8.87
4. Om Kanse - 8.85
5. Dhiraj Malusare - 8.84
Third Year (TE) SGPA
1. Sagar Ghadage - 9.692. Arpita Aadki - 9.57
3. Pratik Shinde - 9.5
4. Pushkaraj Jadhav- 9.48
5. Vaibhav Dhone-9.43
Second Year(SE) SGPA
1. Ishan Shevate - 8.642. Nihal Dhaigude - 8.5
3. Grish Khartode - 8.23
4. Rohan Dombale - 8.14
5. Janhavi Mahadik - 7.93
Final Year(BE) CGPA
1. Mandar More -9.582. Ashish Nalawade -9.52
3. Atik Shaikh -9.4
4. Ashutosh Hajare /Shailesh Mogal -9.29
5. Sanket Jadhav -9.22
Third Year(TE) SGPA
1. Nanasaheb Salunke - 9.712. Pratik Mandhare - 9.19
3. Dhiraj Malusare - 9.12
4. Sagar Pawar - 9.02
5. Darshan Rayate /Om Jalke - 8.79
Second Year(SE) SGPA
1. Pooja Bhoite -8.182. Arpita Aadki/Pushkaraj Jadhav -7.93
3. Vaibhav Dhone -7.82
4. Sagar Ghadage -7.77
5. Ruturaj Indulkar -7.55
Final Year(BE) SGPA
1. Payal Pawar - 9.842. Alfiya Mulani - 9.82
3. Abhinav More - 9.73
4. Malhar Patil - 9.7
4. Shoeb Mulani - 9.7
4. Chetan Deokar - 9.7
5. Rohit Gandhi - 9.68
5. Amit Raut - 9.68
Third Year(TE) SGPA
1. Jadhav Sanket - 9.742. Bawalekar Omkar -9.69
3. Godase Amar - 9.64
4. Hajare Ashutosh - 9.62
4. Shaikh Atik - 9.62
5. Shinde Vishal - 9.6
Second Year(SE) SGPA
1. Nanasaheb Salunkhe - 9.572. Utkarsh Idage - 8.3
3. Pratik Mandhare - 8.39
4. Sagar Pawar - 8.61
5. Dhiraj Malusare - 8.18
Final Year(BE) SGPA
1. Chetan Bankar - 102. Aditya Mate - 10
3. Sanket Jarad - 10
4. Nikhil Mule - 10
4. Bhunje Samruddhi - 10
5. Chhajed Rahul - 10
Third Year(TE) SGPA
1. Alfiya Mulani - 10.002. Sneha Jadhav - 10.00
3. Akshay Kamble -10.00
4. Sahil Waghmare - 10.00
5. Rohit Gandhi -10.00
Second Year(SE) SGPA
1. Mandar More - 9.642. Atik Shaikh - 9.59
2. Shailesh Mogal - 9.59
3. Ashish Nalawade - 9.52
4. Suyash Jagtap - 9.25
5. Ashish Jadhav - 9.18
Final Year(BE) SGPA
1. Rohan Taware -9.842. Aditya Akkalkote -9.64
3. Jyoti Tekale -9.57
4. Suraj Phadtare - 9.52
4. Mansoor Saudagar -9.52
5. Ketan Dethe -9.43
Third Year(TE) SGPA
1. Alfiya Mulani - 10.002. Sneha Jadhav - 10.00
3. Akshay Kamble - 10.00
4. Sahil Waghmare - 10.00
5. Rohit Gandhi - 10.00
Second Year(SE) SGPA
1. Mandar More - 9.642. Atik Shaikh - 9.59
2. Shailesh Mogal - 9.59
3. Ashish Nalawade - 9.52
4. Suyash Jagtap- 9.25
5. Ashish Jadhav - 9.18
Industrial Visits
| 2024-25 | |||||
| Class | Name of Industry | Name of the Subject | Name of the Subject Teacher | Purpose | Date |
| BE | Tungabhadrai Dam, Karnataka. | Energy Engineering | Dr. P. R. Chitragar | To know about energy conversion, its components, energy management, control, measuring instruments. | 02-03-2025 |
| BE | NTPC Kudgi, Karnataka. | Energy Engineering | Dr. P. R. Chitragar | To know about energy conversion, its components, energy management, control, measuring instruments. | 01-03-2025 |
| TE | Piaggio Vehicles Pvt Ltd, MIDC, Baramati | Computer Integrated Manufacturing | Dr. M. S. Lande | To know the advanced manufacturing techniques | 11-02-2025 |
| BE | Cogeneration plant and Sugar factory Malegaon | Energy Engineering | Dr. P. R. Chitragar | To know about energy conversion, its components, energy management, control, measuring instruments. | 10-02-2025 |
| BE | Visit to Mahagenco Solar Power Plant, Shirshuphal, Tal. Baramati | Energy Engineering | Dr. P. R. Chitragar | To know about energy conversion, its components, energy management, control, measuring instruments. | 30-01-2025 |
| SE | Baramati Engineering Pvt Ltd, Baramati (Foundry) | Manufacturing Processes | Dr. S. M. Bhosle | To know various Manufacturing Processes | 27-01-2025 |
| BE | Water Treatment Plant, MIDC, Baramati | Turbomachinery | Ms. M. S. Yadav | To know about Pumping Station, Pumps, water treatment. | 26-10-2024 |
| SE | COEP Pune | Introduction to 3D Printing Technologies (MDM) | Dr. V. B. Gawande | To Provide awareness about 3D Printing Processes | 18-10-2024 |
| BE | Koyana Dam, Humbarli | Turbomachinery | Ms. M. S. Yadav | To know about energy conversion, turbines, hydro-electric power plant | 16-10-2024 |
| TE | Cummins India Limited, Phaltan, Satara | Heat and Mass Transfer | DR. P. R. Chitragar | To gain practical insights into heat transfer applications in engine cooling systems, thermal management, and heat exchanger technologies used in modern engineering solutions. | 10-10-2024 |
| TE | Cummins India Limited, Phaltan, Satara | Digital Manufacturing Laboratory | Dr. M. S. Lande | To see and study advanced manufacturing processes | 10-10-2024 |
| TE | Cummins India Limited, Phaltan, Satara | Skill Development | Mr. D.S. Bhosale | Visit to an industry for awareness about preventive maintenance. | 10-10-2024 |
| SE | Nandan Dairy, Malegaon | Engineering Thermodynamics | Dr. A. H. Kolekar | To study the boiler construction, working and its industrial applications | 08-10-2024 |
| SE | Shri Chhatrapati Sahakari Sakhar Karkhana, Bhawaninagar | Engineering Thermodynamics | Dr. A. H. Kolekar | To study the boiler construction, working and its industrial applications | 08-10-2024 |
| TE | Shri. Chhatrapati Sahakari Sakhar Karkhana, Bhawaninagar | Mechatronics | Mr. D. D. Rupanwar | To understand integration and application of Mechatronics | 08-10-2024 |
| BE | Jachak Tyres, Baramati. | Dynamics of Machinery | Mrs. P. D. Kale | Demonstration of wheel balancing | 04-10-2024 |
| BE | Renuka Ice Factory & Tulja Bhawani Cold Storage, MIDC, Baramati | Heating, Ventilation, Air Conditioning and Refrigeration | Mr. K. M. Jadhav | To know practical aspects of vapour compression cycle and see actual components used in vapour compression cycle | 27-09-2024 |
| 2023-24 | |||||
| Class | Name of Industry | Name of the Subject | Name of the Subject Teacher | Purpose | Date |
| SE | Baramati Engineering Pvt Ltd | Manufacturing Process | Dr. S. M. Bhosle | To know various Manufacturing Processes used in Industry | 27-02-2024 |
| TE | BIT Electronic System, Baramati | Mechatronics | Mr. D. D. Rupanwar | To understand integration and application of Mechatronics | 01-11-2023 |
| SE | Shri Chhatrapati Sahakari Sakhar Karkhana Ltd. | Thermodynamics | Dr. A. H. Kolekar | To study the boiler construction, working and its industrial applications | 29-09-2023 |
| BE | Renuka Ice Factory & Tulja Bhawani Cold Storage, MIDC, Baramati | Heating, Ventilation, Air Conditioning and Refrigeration | Mr. K. M. Jadhav | To know practical aspects of vapour compression cycle and see actual components used in vapour compression cycle | 27-09-2023 |
| 2022-23 | |||||
| Class | Name of Industry | Name of the Subject | Name of the Subject Teacher | Purpose | Date |
| SE | Someshwar Sugar Factory & Nadan Dairy, Malegaon | Thermodynamics | Dr. A. H. Kolekar | To study the boiler construction, working and its industrial applications | 12-05-2023 |
| SE | Baramati Engineering Pvt Ltd | Manufacturing Process | Dr. S. M. Bhosle | To know various Manufacturing Processes used in Industry | 18-04-2023 |
| SE | Suyash Auto Components Pvt Ltd | Manufacturing Process | Dr. S. M. Bhosle | To know various Manufacturing Processes used in Industry | 14-03-2023 |
| BE | Water Treatment plant | Turbo Machinery | Ms. M. S. Yadav | To know about Pumping Station, Pumps, water treatment. | 16-11-2022 |
| BE | Veer Dam Project Division, Shirwal | Turbo Machinery | Ms. M. S. Yadav | To know about energy conversion, turbines, hydro-electric power plant | 11-10-2022 |
| TE | Ascent Enterprises, Baramati | Digital Manufacturing | Dr. M. S. Lande | To explore advancements in Digital Manufacturing, including CAD/CAM integration, CNC automation, additive manufacturing. | 28-09-2022 |
| BE | Kale Cold Storage, MIDC, Baramati | HVAC&R | Mr. K. M. Jadhav | To know practical aspects of vapour compression cycle and see actual components used in vapour compression cycle | 21-09-2022 |
| BE | Renuka Ice Factory E75, MIDC | HVAC&R | Mr. K. M. Jadhav | To know practical aspects of vapour compression cycle and see actual components used in vapour compression cycle | 13-09-2022 |
| 2021-22 | |||||
| Class | Name of Industry | Name of the Subject | Name of the Subject Teacher | Purpose | Date |
| BE | Kudgi Supercritical Thermal Power Plant, Tungabhadra & Almatti Dam | Energy Engineering | Dr. P. R. Chitragar | To know about energy conversion, its components, energy management, control, measuring instruments. | 28-05-2022 |
| TE | Bharat Forge Pvt Ltd, Baramati | Digital Manufacturing | Dr. M. S. Lande | To explore advancements in Digital Manufacturing, including Industry 4.0 applications in modern engineering practices | 11-05-2022 |
| SE | Baramati Engineering Pvt Ltd | Manufacturing Process | Dr. S. M. Bhosle | To know various Manufacturing Processes used in Industry | 25-03-2022 |
| SE | Suyash Auto Components Pvt Ltd | Manufacturing Process | Dr. S. M. Bhosle | To know various Manufacturing Processes used in Industry | 16 -03-2022 |
Guest Lectures
Downloads
| Syllabus:First Year Engineering |
| Syllabus:Second Year Engineering |
| Syllabus:Third Year Engineering |
| Syllabus: M.Tech. |
| Syllabus:Exit Course |
| Syllabus: SPPU, Pune |
| Timetable |
| Academic Calendar |
SAE Collegiate Club
About SAE
Benefits of Joining SAE Collegiate Club
Membership provides for regular members to have access to emagazine- either Automotive Engineering International or Aerospace Engineering magazine. These award winning magazines target hot topics about ground vehicle and aircraft developments to provide members with a valuable resource for keeping pace with the rapidly changing technology in the mobility industry.Members can purchase SAEINDIA and SAE International technical papers and publications at member discount prices.
Members receive free registration at SAEINDIA's lecture meetings and exhibits. This unique benefit puts the members in touch with other professional engineers and suppliers who determine the future of the expanding mobility industry worldwide.
SAEINDIA regularly plans and offers many career development activities such as job fairs, career enhancement sessions, resume/recruitment boards, and resume database services. Professional development seminars are also available at special member discounted rates, as well as undergraduate and graduate scholarship programs.
Access vital high-tech mobility information through renewal registration fee for attending SAEINDIA National and International Congress.
Network with industry leaders and corporate officials at SAEINDIA meetings and local section activities.
Save Rs.2500 to Rs.10000 while attending SAEINDIA professional development business and TOP TECH Programs.
Objectives:
To design, build, test and market a self-designed vehicle.
To make students competent to simulate real world design projects in a conducive environment with thorough team spirit and self-motivation.
To promote healthy network connections by bridging the gap between industries and students for global exposure and quality.
Events conducted under SAEINDIA Collegiate club
Department of Mechanical Engineering has successfully organized two days technical event “Elysium-2K19” during 13-14th September 2019 under SAE collegiate club. Interdisciplinary events were organized and about 800-900 students from our institute and from outside institute participated in various events. The event was inaugurated in presence of chief guest, Shri. Dr. Nishikant V. Deshpande, Ex. Director, NIT Silchar, Assam, Hon. Principal, Dean Academics and other dignitaries. The chief guest for the valedictory function was Shri. Kishor M. Bhapkar, Exce. Vice President, ISMT ltd, Baramati.Department of Mechanical Engineering organised a Two-Day Technical Event -Elysium-2K18 on 21 and 22 September 2018 under SAE Collegiate Club. During this event, interdisciplinary activities were organized and 800 students from our institute and other institutes participated in various activities. The event was inaugurated in the presence of Chief Guest, Shri. S.B. Patil, Senior H.R. Manager, Bharat Forge, Baramati, Hon. Principal, Dr. R S Bichkar and other dignitaries. Various events like Paper-Pen Thought, Get Hired, Poster Presentation, Technical Quiz, Talk War, Treasure Hunt and Game war were organized.